Report and Consent Application Guide - building regulations
A Report and Consent application is needed if you are varying a requirement of the Building Regulations. It cannot be used where the works have already started.
We recommend you consult with your Building Surveyor or designer prior to making an application to avoid unnecessary requests and delay. Please note there are set fees applicable to this sort of application regardless of the outcome.
If work has already started you will need to apply for a 'Report Only' application and we suggest you contact Council’s Building Team to discuss this on 9518 3555.
Please read the guidelines below before applying for Report and Consent. For more information, please contact Council on 9518 3555.
The following documents are required to complete your application:
Please note the application will incur a fee of $299.85.
If you require a paper-based form, please contact Council on 9518 3555.
Visit Council’s Customer Service Centre.
Guidelines for report and consent to vary building regulations
Minister's Guidelines - Siting and Design of Single Dwellings(PDF, 216KB)
73(2) - Setback from a street alignment not complying with reg 73 (maximum)(PDF, 305KB)
74(4) - Setback from a street alignment not complying with reg 74 (minimum)(PDF, 394KB)
75(4) - Building height not complying with reg 75(PDF, 306KB)
76(4) - Site coverage not complying with reg 76(PDF, 382KB)
77(3) - Permeable surfaces not complying with at least 20% of allotment area reg 77(PDF, 242KB)
78(6) - Carparking spaces not complying with reg 78(PDF, 321KB)
79(6) - Side or rear boundary setbacks not complying with reg 79(PDF, 331KB)
80(6) - Walls or carports not complying with reg 80 (walls on boundaries)(PDF, 303KB)
81(6) - Building setbacks not complying with reg 81 (daylight to existing habitable room window)(PDF, 330KB)
82(5) - Building setbacks not complying with reg 82 (solar access to exist north facing windows)(PDF, 362KB)
83(3) - Building design not complying with reg 83 (overshadowing of recreational private open space)(PDF, 302KB)
84(9) - Window or raised open space not complying with reg 84 (overlooking)(PDF, 311KB)
85(3) - Building design not complying with reg 85 (daylight to habitable room window)(PDF, 298KB)
86(3) - Private Open Space not complying with reg 421(PDF, 309KB)
87(2) - Siting of appurtenant Class 10a buildings(PDF, 260KB)
89(3) - Front fence height not complying with reg 89(PDF, 370KB)
90(2) - Fence setback on side or rear boundary not complying with reg 90(PDF, 291KB)
91(5) - Length or height of side or rear boundary fence not complying with reg 91(PDF, 303KB)
92(2) - Fence within 9m of street intersection(PDF, 261KB)
94(6) - Fence setback not complying with reg 94 (daylight to existing habitable room window)(PDF, 288KB)
95(3) - Fence setback not complying with reg 95 (solar access to exist north facing windows)(PDF, 306KB)
96(3) - Fence design not complying with reg 96 (overshadowing of recreational private open space)(PDF, 342KB)